Size & Fit Guide
Measure clearly. Move confidently.
The right fit starts with the right reference point. Use product-specific measurements for supports, gloves and training accessories, then confirm equipment dimensions and working clearance for your training space.
Fit starts with context
Measure the exact body point, equipment footprint or working area requested.
Start with the individual product.
A size label does not always mean the same thing across knee supports, wrist supports, compression sleeves, training gloves, mats or larger fitness equipment. Materials, intended movement and adjustment systems can change how a product fits.
Review the measurements shown with the product, use a flexible measuring tape where appropriate and compare your result with the exact chart attached to that item. When you fall between options, consider the product’s intended adjustment range and contact PulseFit if the guidance remains unclear.
Body-worn supports
Sleeves, braces, gloves and wrist supports depend on circumference, position, closure range and the intended level of contact.
- Measure the exact point named in the product guide
- Keep the tape level and close without pulling tightly
- Review whether the product uses straps or fixed stretch
Handheld training tools
Grip trainers, jump ropes, resistance tools and recovery equipment may depend on handle size, rope length, resistance range or the area used during movement.
- Review handle dimensions and adjustment points
- Confirm rope or band length where provided
- Consider storage and travel dimensions
Floor and station equipment
Benches, racks, cardio equipment, mats and storage systems require both product dimensions and clear working space around the equipment.
- Measure the complete footprint, not only the main frame
- Allow room for entry, adjustment and movement
- Check doorways, corners and storage access
Measure once for the number. Measure again for confidence.
Use the same posture, measurement point and tape tension each time. Small changes in placement can create a different result, especially around joints and tapered areas of the body.
Read the product instruction
Identify whether the product requests circumference, length, width, equipment footprint or another specific reference.
Use the correct tool
Use a flexible measuring tape for body measurements and a stable tape measure for floors, equipment and working clearance.
Record the result
Write down the measurement in the same unit shown in the product guide and avoid rounding until you compare it with the chart.
Repeat and compare
Measure a second time, confirm the result and compare it with the exact size or dimension guidance provided for the product.
Match the method to the product.
This reference explains common measurement types across the PulseFit range. It does not replace the size chart or dimensions supplied with an individual product.
| Measurement | How to measure | Common categories | What to confirm |
|---|---|---|---|
| Circumference | Wrap a flexible tape around the product-specific point. Keep it level and close to the body without compressing the area. | Knee supports, wrist supports, compression sleeves and some training gloves. | Exact measurement location, adjustment range and whether the material uses fixed stretch or straps. |
| Length | Measure in a straight line between the points shown in the product guide. Avoid following a curve unless the instructions request it. | Jump ropes, resistance bands, mats, rollers and selected mobility tools. | Adjustable range, usable length and whether handles or attachment points are included in the measurement. |
| Footprint | Measure the maximum floor length and width occupied by the complete product in its normal setup. | Benches, racks, exercise bikes, rowing equipment, treadmills and storage. | Frame extensions, pedals, handles, adjustment positions and required access around the product. |
| Working clearance | Add practical open space around the equipment for entry, movement, adjustment and safe storage. | Cardio equipment, strength stations, functional training areas and mats. | Doorways, ceilings, walls, furniture, nearby equipment and full movement range. |
Product dimensions, measurement points and fit descriptions can vary. Always use the measurements attached to the specific product you are considering.
Close contact should still allow controlled movement.
Body-worn training accessories should follow the product’s intended placement and adjustment method. A secure fit should not depend on pulling the product beyond its designed range.
- Align seams, panels and closures as shown in the product guide
- Check that straps remain within their intended attachment areas
- Recheck the selected size if the product shifts or folds during movement
Choose dimensions around the way you practice.
Mat length, width, thickness and accessory proportions should support the movements you plan to perform and the space available around your practice area.
- Compare mat dimensions with your preferred training position
- Allow space for blocks, rings, bands and mobility accessories
- Confirm rolled or folded dimensions when storage space is limited
Plan for the movement around the machine.
The listed product dimensions are only one part of a training setup. Larger equipment also needs practical clearance for access, adjustment, storage and the movement performed during use.
Check the route from the delivery entry to the final training area, not only the space where the equipment will remain.
Clear guidance before you choose.
Fit can vary by product design, material, adjustment system and intended training use. Use the product-specific information as your primary reference.
Can I use one universal size chart for every PulseFit product?
No. Measurement points and fit ranges can differ between supports, sleeves, gloves, mats, bands and larger equipment. Use the chart or dimensions shown with the individual product.
How tightly should I hold the measuring tape?
Keep a flexible tape close to the body without pulling it tightly or allowing it to hang loose. The tape should remain level at the measurement point named in the product guide.
What should I do if my measurement falls between two sizes?
Review the product’s adjustment method, material and fit notes before choosing. Contact PulseFit with the product information and your measurement if the product guidance does not explain how to select between sizes.
Should I measure over clothing?
Follow the product-specific instructions. Unless the guide states otherwise, use a consistent measurement point and avoid bulky layers that can change the result.
How do I know whether larger equipment fits my room?
Compare the listed dimensions with your floor space, then add working clearance for entry, adjustment and movement. Also review doorway, hallway, corner and stair access before delivery.
Can PulseFit help me review a product measurement?
Yes. Contact PulseFit with the product name, the measurement point you used and your recorded result. Do not send unrelated personal or payment information.
Questions about size or dimensions
info@pulsefit.lolReach the PulseFit team
8188868464Plan your training space
Standard shipping time is 3–5 business days.
Use the individual product guide
Product-specific measurements take priority over general category guidance.
Measure the setup. Build the routine.
Compare product-specific measurements, confirm your available training space and choose equipment that fits the way you plan to move, organize and recover.